용어 사전-NEWARE - 배터리 테스터 - 배터리 테스트 장비

Glossary

하드웨어

테스트 설비 환경 시험 챔버 자동화 라인 부품 보조 모듈 Others
소포트웨어

BTS BTSDA Others

Hardware Module

Product Features

Product Parameters

Loop start

Restart the test with the steps of the last test, and combine the data of the two tests together.
Single stop

Manually stop the selected channel.
All start

Load the barcode file and start all the channels under one control unit or in one cabinet.
Layer start

Under the production line mode, start the all channels of one layer by pressing at one time.
All stop

Stop all channels under under one control unit or in one cabinet.
Preset pause

Set the pause condition in advance, and stop the test when the operation of the step meets the condition.
Set parallel

Set the selected channels in parallel mode.
Release parallel

Release parallelled channels.
Recording condition

Conditions for data recording.
Subsection record

According to certain conditions, the recording conditions are set separately.
Cyclic accumulation

The capacity of the same step will be accumulated.
Automatic backup

The software/system saves the tested data into a specified directory automatically according to the set conditions.
Fading rate

The discharge capacity of a certain cycle is set as the standard, and the decay rate is obtained by comparing each subsequent cycle with the standard cycle.
Copy channel

Copy the steps of one channel to other channels.
Channel information

The details of the selected channel.
Battery internal resistance

The resistance of the battery itself.
Capacity accumulation

Accumulate the capacity of continuous charge or discharge (exclude rest step) steps.
Nominal capacity

The released capacity of a battery when it is discharged from full state to the termination voltage.
Nominal specific capacity

The nominal capacity per unit mass/volume.
State of charge (SOC)

It is used to reflect the current capacity of the battery and can be expressed as percentage ratio of the current capacity and rated capacity
Depth of discharge (DOD)

The percentage of released capacity by the battery to its rated capacity.
Capacitance value

The amount of the electric charge stored in a capacitor at a specific electric potential.
Discharge time

The consumed time for a Battery to discharge to the termination voltage.
Cycle life

The cycle number before the battery capacity is reduced to a certain value under specific charge/discharge conditions

쿠키 사용 주의사항

당사는 쿠키를 사용하여 귀하의 웹사이트 이용 경험을 개인화하고 개선합니다. 사이트를 계속 탐색하면 쿠키 사용에 동의하게 됩니다.

동의